Sensors Module Accessories
Name:Bandsaw Vibration Sensor Module
Model:CPC-90101
Propose:Bandsaw Vibration Sensor
The main purpose is to detect the vibration of sawbands, installed around the sawbands, and extract the characteristics of the friction frequency through fast Fourier conversion to visualize the life trend of saws, assisting the operator to clearly understand the condition of the sawbands and achieve the purpose of foreseeing maintenance.
Applicable for:<CPC-100/CPC-VT/CPC-GO/CPC-GO2>
Price:(USD) 991.50
Name:Blade Speed Sensor Module
Model:CPC-90102
Propose:LED sensor/access switch Sensor
The main purpose is to detect the speed of the sawbelt, installed on the side of the driven wheel or fallen wheel, the sensor frame can be freely adjusted by the size of the random table, wheel height, band width, and the use of non-contact sensors to enhance the adjustability and adaptability of heterogeneous machines, and the use of sensors to read out the trigger frequency to calculate the speed of the sawbelt, in order to facilitate the recording of the operator to use the parameters of the working conditions, the calculation of tooth depth, real-time monitoring and can issue a debugging alarm.
Applicable for:<CPC-100/CPC-VT/CPC-GO/CPC-GO2>
Price:(USD) 227.50
Name:Feed Rate Sensor Module
Model:CPC-90103
Propose:Feed Rate Sensor Module
The main purpose is to detect the position of the saw bow, the sensor frame multi-segment angle adjustable heterogeneous machine adaptability is very high, horizontal gantry, scissor saws can be installed, accurate record the position of the saw bow, feed rate, cutting rate, can be real-time monitoring and control and can be issued to remove the error alarm.
Applicable for:<CPC-100/CPC-VT/CPC-GO/CPC-GO2>
Price:(USD) 741.00
Name:Current Sensor Module
Model:CPC-90104
Purpose:Current Sensor
The main purpose is to detect the use of each motor of the sawing machine, usually installed in the electronic control box, using non-intrusive hook-type than the ballast, installed in the power side, hydraulic motor, the main motor, simple and quick installation.
The data produced by the electric flow detector are crop rate (daily/weekly/monthly/yearly), electricity consumption statistics, sawbelt motor current, hydraulic motor current, real-time processing status, and production kanban real-time light signal.
Applicable for:<CPC-100/CPC-VT/CPC-GO/CPC-GO2>
Price:(USD) 189.00
Name:Blade Change Sensor Module
Model:CPC-90105
Purpose:Proximity Switch
The main purpose is to detect the position of the band tension hydraulic steel, which can easily identify whether the band has been replaced, so as to facilitate the database to record different bands separately.
Applicable for:<CPC-100/CPC-VT/CPC-GO/CPC-GO2>
Price:(USD) 79.50
Name:Material Height Sensor Module
Model:CPC-90106
Purpose:Proximity Switch
The sawbow quick-action mechanism, also known as the quick-down lever, is mainly used on the sawbow to easily determine the machine's operating conditions.
Applicable for:<CPC-100/CPC-VT/CPC-GO/CPC-GO2>
Price:(USD) 94.50
Name:Horizontal Bandsaw- Material Width Laser Sensor Module
Model:CPC-90107
Purpose:Laser distance measuring device
For measuring the width, height and position of the material, the sensor frame can be adjusted to install multiple sections, which can automatically record the size of each feeding accurately and check the error against the work order.
Applicable for:<CPC-100/CPC-VT/CPC-GO/CPC-GO2>
Price:(USD) 741.00
Name:Horizontal Bandsaw-Material Height Laser Sensor Module
Model:CPC-90109
Purpose:Laser distance measuring device
For measuring the width, height and position of the material, the sensor frame can be adjusted to install multiple sections, which can automatically record the size of each feeding accurately and check the error against the work order.
Applicable for:<CPC-100/CPC-VT/CPC-GO/CPC-GO2>
Price:(USD) 741.00